System Setup; Sleep Mode; Display Mode - Henry Schein 3x1.5V AA Instrucciones De Uso

ENGLISH
The alarm and beep volume can be set through the interface, and can also be changed by pressing the Side
UP/DOWN buttons.

5.4 System Setup

Pick and enter the [System Setup] interface from the main menu, refer to Fig.5-8.
5.4.1 Time/Date
Refer to 3.1 Date&Time Setting.
5.4.2 Brightness
Pick and enter the "Brightness" item from the [System Setup] interface, refer to Fig.5-9. Decrease the level of
brightness by pressing the LEFT/DOWN button, and increase the level of brightness by pressing the RIGHT/
UP button.
The Brightness level can be set as 0, 20%, 40%, 60%, 80% or 100%.
The brightness level can also be changed by pressing the Side UP/DOWN buttons for extended time.

5.4.3 Sleep Mode

Pick and enter [Sleep Mode] interface from the [System Setup] interface, refer to Fig.5-10.
Sleep Status: ON or OFF
Sleep Time: 20s,30s,40s,50s,60s
Press the MENU button, the oximeter returns to previous interface.

5.4.4 Display Mode

Pick and enter [Display Mode] interface from the [System Setup] interface, refer to Fig.5-11. There are two
display modes for selection: WAVE and DIGITAL. The interface of the two display modes are as shown in
Fig.4-3&4-4.
Fig.5-7
Fig.5-8
Fig.5-9
Fig.5-10
10