Publicidad
Idiomas disponibles
Idiomas disponibles
8 - adjusting the headhugger (Group 0+ mode: 0 - 13kg)
The inner cushion of the headhugger can be removed to gain space for your child's head.
Remove the headhugger from the child car seat.Unfasten the Velcro
the headhugger (a) and push them through the slots (b).
Remove the inner cushion (c) and store in a safe place for future use.
9 - installing the child car seat rearward facing
(Group 0+ mode: 0 - 13kg) - 1
The base support is required when the seat is used for Group 0+ fitting in rearward
facing mode. Note: The base support is NOT to be used in forward facing mode.
The support is located under the base of the child car seat. Pull the base support forward
(a) until it locks in place securely.
The base support will lift the front of the child car seat (b).
10 - installing the child car seat rearward facing
(Group 0+ mode: 0 - 13kg) - 2
Ensure the base support is raised (See Step 9) and adjust the child car seat to its most
reclined position (position 3) (See step 3) - Please note that in Group 0+ mode, the car
seat can only be used with the seat in the most reclined position.
Marks and guides are located on the child car seat. For rearward installation these are
blue in colour. Turn the adjustable belt guide so that the open end of the guide is facing
the blue "Rearward Facing" label (a).
Place the child car seat on the vehicle seat. Ensure the front edge of the seat (b) and
base support (c) are firmly pressed against the seat.
Push the vehicle seat belt through the gap in the seat as shown (d).
11 - installing the child car seat rearward facing
(Group 0+ mode: 0 - 13kg) - 3
Place the waist belt into the belt guides (a & b).
Fasten the vehicle seat belt buckle (c).
12 - installing the child car seat rearward facing
(Group 0+ mode: 0 - 13kg) - 4
Pull back on the diagonal belt to tension the waist belt (a).
Place the diagonal vehicle belt through the vehicle belt hook (b) and into the adjustable
belt guide (c).
13 - installing the child car seat rearward facing
(Group 0+ mode: 0 - 13kg) - 5
Pull back on the diagonal belt to tension the vehicle seat belt (d).
Check the vehicle seat belt is not twisted.
®
tabs on the back of
Publicidad
