Arregui IGNUM 41010 Manual De Instrucciones página 10

<EN>
• Press the * key and the year will flash. Use the 8 key to find the number
you wish going upwards and the 0 key to find it going downwards. Then
set the year using the # key.
• Then the month will flash, so use the 8 and 0 keys again to set the
month and once it is set, press #.
• Repeat the operation to consecutively set the day, the time and the
weekday.
D. CHANGING THE OPENING CODE
D.1. USER CODE
• Press the # key and the screen will indicate "-------".
• First introduce the current opening code (123456 if it is the first time
you are doing this) and press # again. You will hear a beep and the
screen will indicate "OPEN".
• Press the * key and the screen will indicate "-------". Then introduce
a code with 4 to 8 digits and confirm it by pressing the # key. At that
moment, the screen will indicate "INTO", which means that the change
in code has been successfully produced.
• Check that the change in code has indeed been carried out BEFORE
CLOSING THE SAFE.
D.2. MASTER CODE
• Press the # key and the screen will indicate "-------".
• First introduce the current opening code (123456 if it is the first time
you are doing this) and press # again. You will hear a beep and the
screen will indicate "OPEN".
• Press the * key and the screen will indicate "-------". Then introduce a
code with 4 to 8 digits and confirm it by pressing the # key. At that
moment, the screen will indicate "INTO", which means that the change
in code has been successfully produced.
• Check that the change in code has indeed been carried out BEFORE
CLOSING THE SAFE .
WARNING:
• For your own security, it is recommended to change the opening code
as soon as you open the safe for the first time. This code change
must be carried out with the door open.
• If you introduce a wrong number, you can press the * key to delete it.