Ivoclar Vivadent VivaStyle 30% Instrucciones De Uso página 3

7. Remove any remaining gel and rinse thoroughly.
8. Clean the tray with a toothbrush under running
water.
9. Repeat step 2 to 8 for further applications.
Tip
Tooth whitening with VivaStyle 30% can be used as
initial whitening treatment. The whitening pro-
cedure can the continued by the patient at home
using a lower concentration of VivaStyle whitening
gel.
Notes
– The Patients should be reminded of the following
points in particular:
– Avoid, or at least try to minimize, the
consumption of coffee, tea, red wine, colas
and smoking to prevent the chance of
discoloration occurring in the teeth.
– Avoid the consumption of citrus fruits and
fruit juices on the day of the treatment, as
they can promote sensitivity.
– Overfilling the tray with tooth whitening gel does
not result in faster or better results, and may
cause sensitivity.
– VivaStyle tooth whitening gel should be applied
before the placement of new tooth-coloured
restorations, as the tooth whitening gel does not
whiten any existing dental restorations. The
treatment with VivaStyle should be completed at
least two weeks before the placement of a new
restoration. Existing restorations may not match
the lighter shade of the teeth after the treatment
and may need to be replaced.
Warning
VivaStyle gel contains carbamide peroxide and is an
irritant. Avoid contact of the gel with the skin,
mucosal tissues and eyes. If contact with the eyes
occurs, wash the areas affected with copious
amounts of water and seek medical advice.
Storage
– Store material at 2–8°C (36–46°F).
– Protect VivaStyle gel from heat and sunlight.
– Do not freeze VivaStyle syringes.
– See date of expiration for shelf life.
Keep out of the reach of children!
For dental use only!
Date information prepared:
09/2007
Ivoclar Vivadent AG
FL-9494 Schaan/Liechtenstein
The material has been developed solely for use in dentistry. Processing should be
carried out strictly according to the Instructions for Use. Liability cannot be accepted for
damages resulting from failure to observe the Instructions or the stipulated area of
application. The user is responsible for testing the material for its suitability and use for
any purpose not explicitly stated in the Instructions. Descriptions and data constitute no
warranty of attributes and are not binding.