Marta MT-4320 Manual De Instrucciones página 40

TROUBLESHOOTING
Case
The lid is not closed well
Hard to open the lid
Steam is going from under the lid while
cooking
E1 on the display
E2 on the display
E3 on the display
E4 on the display
Unplug the appliance, let it cool down. If problem still exists, contact authorized service center.
SPECIFICATION
Power supply
Power
Net weight / Gross weight
Package size (L х W х H)
WARRANTY DOES NOT APPLY TO CONSUMABLES (FILTERS, CERAMIC AND NON-STICK COATING, RUBBER SEALS, ETC.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters
indicate the month, the 6th and 7th indicate the year of device production.
Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device.
Production branch:
COSMOS FAR VIEW INTERNATIONAL LIMITED
Room 701, 16 apt, lane 165, Rainbow North Street, Ningbo, China
Cause
Sealed ring is not set properly
Float valve is blocked in high position
Float valve is not in low position
There is no sealed ring
The sealed ring is dirty
The sealed ring is damaged
The lid is not closed well
The sensor‟s open circuit
The sensor‟s cut-out
Overheat
The pressure switch malfunction
Check if the sealed ring is set properly
Make float valve free from strange objects which blocked it
If steam relief valve is open and there is no outgoing steam, but float valve is
not in low position, then press it slightly with wooden stick
Set the sealed ring
Clean the sealed ring
Contact service center
Close the lid according to the article "Using a multicooker"
Replace the sensor
Replace the sensor
Let the device cool down
Replace the switch
220-240 V, 50 Hz
900 W
5 kg / 6 kg
335 x 335 x 360 mm
40
MT-4320/4321
Solution