The [+] Button; The [Select] Button; Lcd Display - Suunto MARINER Guía De Usuario

1.2.2 The [+] Button

Is located on the bottom right of the Wristop Computer.
• In the setup process, pressing the [+] button changes or scrolls the value upward.
• In the timing functions, this button can act as a start/stop (or On/Off) button.
1.2.3 The [-] Button
Is located on the bottom left of the Wristop Computer.
• Sets the sailing timer value (120 min. – 1 min.)
• In the setup process, pressing the [-] button changes or scrolls the value downward.
• This button is also known as the "Fast Bearing" button. Pressing the [-] button in any of the main modes (except in
Sailing Timer) will quickly display the compass mode, showing either the normal compass or bearing tracking feature
(depending on what display has been chosen in the compass mode).

1.2.4 The [Select] Button

Is located on the top left of the Wristop Computer.
• In the main mode level, pressing the [Select] button allows the user to enter into the sub modes of the particular function
or return to the main mode the user is in.
• In the main mode or sub mode, pressing and holding the [Select] button in for more than 2 seconds allows the user
to enter the setup process.
• In the setup process, the [Select] button allows the user to move between settable units or values and determine
preferences.

1.3 LCD DISPLAY

The display is designed to offer maximum clarity and simplicity to the user.
The display is divided into several regions or areas.
• The Outer Circumference encompasses the outer boundary of the LCD display.
6