User Information; Technical Assistance / Guarantee - Extel WEVP 258 E Instrucciones De Uso

c. Settings on the roadside panel
Setting of the sound level for the speaker of the roadside panel.
In case of a whistle (Larsen effect), adjust the loudspeaker's volume in
order to eliminate the trouble.
6. OPTIONS
WE 5001/2 bis
WECA 90501

7. USER INFORMATION

8. TECHNICAL ASSISTANCE / GUARANTEE

Problem
not light up
sound quality
tone
No action of the call
button
pushing the image
recall button
WECA 90301
Possible cause
- There is no power
supply to the monitor
- Environnement
- Camera position
- Installation
- Installation
- Installation
WECA 90501.
and WE 5004/2 bis
- Check that the adaptor plug is correctly connected.
- Check the calibre of the cables used and that the videophone
connrecting cables are not in the same sheath as the 230 V cables.
- Make sure that the camera lens is not pointing directly at the sun
or at a reflective surface.
- Check the installation cable: perform a table-top trial with 30 cm
of cable.
- Ring tone volume setting on silence. see p7
- Reversed wiring
- Reversed wiring
B A 2 1
+
c
Solution