20
4
1
3. Detach the snaps and the hook and loop fasteners.
4. Lift the upper flap upward and pull the lower flap forward, and then store the
shoulder straps in their storage compartments.
5. Pull the buckle to the back of the seat pad, and then store the buckle and
buckle tongues in respective storage compartments.
6. Do reattach the snaps and the
hook and loop fasteners to recover
the seat pad. The recovered seat
pad is shown as
21
ii. Securing your Child in the Child Restraint
1. Let the child sit in the child restraint, check whether the shoulder belt
guides are at proper height.
13
2
5
3
-1 &
-2
20
20
-3
20
-4 &
-5
20
20
21
2. Position shoulder belt through
shoulder belt guide, pass waist
belt through seat slots. Fasten
buckle and pull the vehicle belt to
tighten.
22
!
Shoulder belt must pass through
shoulder belt guide as shown in
-1.
23
!
Waist belt must pass through seat
slots.
!
The child restraint can not be used
if the vehicle safety belt buckle
(female buckle end) is too long to
anchor the child restraint securely.
!
Never use a vehicle waist-only belt
to secure your child.
!
Do not use shoulder belt loose or
positioned under arm.
!
Do not use shoulder belt behind
child's back.
!
Do not allow child to slide down in
the child restraint in case of
strangulation.
22
23
1
2
14