Contents Of The Package; Accessory Installation - WEG CFW500 Guía De Instalación, Configuración Y Operación

Ocultar thumbs Ver también para CFW500:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Digital I/Os Plug-in Module

3 CONTENTS OF THE PACKAGE

When receiving the product, check if this package
contains:
Accessory in anti-static packaging.
Installation, configuration and operation guide.

4 ACCESSORY INSTALLATION

The accessory is easily installed or replaced. For correct
installation of the accessory execute the following steps:
Step 1: With the inverter de-energized, remove the front
cover of the Inverter
Step 2: Remove the accessory (connected plug-in
module) if any, as in
Step 3: Fit and press the accessory to be installed as
indicated in
figure A.1 (b)
cover of the inverter.
Step 4: Power up the inverter and check if parameter
P0027 shows value 2 (P0027=2). If this information is not
true, check if the module used is actually the CFW500-
IOD and repeat steps 1-4.
6 | CFW500
(figure A.1
(a)).
figure A.1
(a).
and then assemble the front

Publicidad

Tabla de contenido
loading

Tabla de contenido