WEG CFW500 Guía De Instalación, Configuración Y Operación página 8

Digital I/Os Plug-in Module
GND
+24 V
Figure 2: Signals of the control connector
The location of the DIP-switches for selecting the type
of analog input and output signal and termination of
the RS485 line can be better visualized in figure A.2.
To use the analog inputs and/ or outputs with signal in
current, switch S1 and related parameters must be set as
indicated in table 1. For further details about the control
connections see chapter 3 - Installation and Connection
of the CFW500 user's manual.
8 | CFW500