WEG CFW500 Guía De Instalación, Configuración Y Operación página 9

Table 1: Settings of switches to select the type of analog
input and output signal of the CFW500-IOD
Input/
Signal
Output
Voltage
AI1
Current
Voltage
AO1
Current
Table 2: Configurations of the RS485 configuration
Communication Switch Switch setting
RS485
(*) No other combinations of the switches are allowed.
This module has a connector
use of the Flash Memory Module (CFW500-MMF), which
allows data transfer between inverters. For further details
on this accessory, refer to the installation, configuration
and operation guide of the CFW500-MMF.
Digital I/Os Plug-in Module
Setting of Range of
Switch S1 Signal
S1.1 = OFF 0...10 V
0...20 mA P0233 = 0 or 2
S1.1 = ON
4...20 mA
S1.2 = ON 0...10 V
0...20 mA
S1.2 = OFF
4...20 mA
switches
S1.3 = OFF and
S1.4 = OFF
S1
(*)
S1.3 = ON and
S1.4 = ON
(figure
Parameter
Settings
P0233 = 0 or 2
P0233 = 1 or 3
P0253 = 0 or 3
P0253 = 1 or 4
P0253 = 2 or 5
Option
RS485
termination
OFF
RS485
termination
ON
A.2) to enable the
CFW500 | 9