Apéndice D - Declaración De Conformidad; Ec Declaration Of Conformity - Ebsray RC Serie Instrucciones De Instalación, Funcionamiento Y Mantenimiento

APÉNDICE D – DECLARACIÓN DE CONFORMIDAD

EC DECLARATION OF CONFORMITY

Item Content based upon Annex X of ATEX Directive 94/9/EC
Manufacturer Ebsray Pumps Pty Ltd
Address 628 Pittwater Road Brookvale NSW 2100 Australia
Manufacturer's Declaration
We, Ebsray Pumps Pty Ltd declare that the following equipment :
Description of Equipment
Ebsray R Series Regenerative Turbine bareshaft Pump ;
Model / Type :
RC20
RC25
R10
RB10
for pumping LPG and other light liquids ;
and bearing the following marking :
II 2 G c T4
Declaration of compliance Is designed and manufactured in compliance with the following applicable
Directives :
Applicable Directives
evaluated by Manufacturer
- not checked by Notified
Body
First applicable Directive ATEX Directive 94/9/EC - by application of the following Standards :
1.
EN 1127-1 (1998)
Individual declaration of
EN 13463-1 (2001)
compliance
EN 13463-5 (2003)
Pressure Equipment Directive (PED) 97/23/EC - but excluded under Article 3.10
Second applicable Directive
Machinery Directive (MD) 98/37/EC – by application of the following Standards :
Third applicable Directive
EN ISO 12100-1 (2003)
EN ISO 12100-2 (2003)
EN 809 (1998)
Manufacturer's own
Subject to the use for which the product(s) were designed and/or installed in
accordance with the relevant Standards and Codes – all in conjunction with the
warning
Manufacturer's own Installation and Operating Instructions and
recommendations
Final declaration We, the undersigned, hereby declare that the product(s) specified conform to the
listed Directive(s) and Standard(s)
Signatory of person legally Ebsray Pumps Pty Ltd
responsible
W.A.Ebsary - Managing Director
Place / Date Brookvale, Australia / 10 September 2004
EC DECLARATION OF CONFORMITY
Item Content based upon Annex X of ATEX Directive 94/9/EC
Manufacturer Ebsray Pumps Pty Ltd
Address 628 Pittwater Road Brookvale NSW 2100 Australia
Manufacturer's Declaration
We, Ebsray Pumps Pty Ltd declare that the following equipment :
Description of Equipment Ebsray Polygear Series Mechanical Shaft Coupling ;
Model / Size / Type :
575
for pumps in LPG and other liquid service ;
and bearing the following marking :
II 2 G c T4
Declaration of compliance Is designed and manufactured in compliance with the following applicable
Directives :
Applicable Directives
evaluated by Manufacturer
- not checked by Notified
Body
First applicable Directive ATEX Directive 94/9/EC - by application of the following Standards :
1.
EN 1127-1 (1998)
Individual declaration of
EN 13463-1 (2001)
compliance
EN 13463-5 (2003)
Machinery Directive (MD) 98/37/EC – by application of the following Standards :
Second applicable Directive
EN ISO 12100-1 (2003)
EN ISO 12100-2 (2003)
Manufacturer's own
Subject to the use for which the product(s) were designed and/or installed in
accordance with the relevant Standards and Codes – all in conjunction with the
warning
Manufacturer's own Installation and Operating Instructions and
recommendations
Final declaration We, the undersigned, hereby declare that the product(s) specified conform to the
listed Directive(s) and Standard(s)
Signatory of person legally Ebsray Pumps Pty Ltd
responsible
W.A.Ebsary - Managing Director
Place / Date Brookvale, Australia / 10 September 2004
22
(all Types)
(all Types)
(all Types)
(all Types)
(all Sizes) (all Types)
Publication No 2011-05
Publication No 2041-05