Service; Before Calling Service; Product Data Rating Plate; Installer Checklist - Thermador PROFESSIONAL VCIN36JP Manual De Instalación

Service

Before Calling Service

See Use and Care Guide for troubleshooting information.
Refer to the Warranty in the Use and Care Guide. Please
be prepared with the information printed on your product
data rating plate when calling (see Figure 39).
To reach a service representative, see the contact
information at the back of the manual. Before calling,
please note the complete model and serial number printed
on your product data rating plate (see Figure 39).
Keep your invoice or escrow papers for warranty validation
if service is needed.

Product Data Rating Plate

The data rating plate shows the model and serial number. It
is located under the filter.
Data Rating
Plate
behind filter
Figure 39: Data Rating Label Plate

Installer Checklist

Specified clearances maintained to cabinet surfaces.
Appliance is level.
All packaging material removed.
Receptacle with correct over-current protection is
provided for service cord connection.
Proper ground connection.
Owner is aware of location of the main circuit breaker.
INSTALLER: Write the model number and serial
number found on the Data Rating Label Plate in the
USE AND CARE GUIDE.
and the
GUIDE INSTALLATION MANUAL
of the appliance.

To Clean and Protect Exterior Surfaces

• The stainless steel surfaces may be cleaned by wiping
with a damp soapy cloth, rinsing with clear water and
drying with a soft cloth to avoid water marks. Any mild
glass cleaner will remove fingerprints and smears.
• For discolorations or deposits that persist, refer to the
Use and Care Guide.
• To polish and protect stainless steel, apply a stainless
steel conditioner with a soft cloth. The Thermador
Stainless Steel Conditioner is available for purchase in
the online eShop (www.thermador-eshop.com). Order
part number 00576697.
• DO NOT allow deposits to remain for long periods of
time.
• DO NOT use ordinary steel wool or steel brushes.
Small bits of steel may adhere to the surface causing
rust.
• DO NOT allow salt solutions, disinfectants, bleaches or
cleaning compounds to remain in contact with stainless
steel for extended periods. Many of these compounds
contain chemicals which could prove harmful. Rinse
with water after exposure and wipe dry with a clean
cloth.
Leave the
USE AND CARE
with the owner
English 23