Atlas Copco Pionjär Serie Instrucciones De Seguridad Y Para El Operario página 16

Safety and operating instructions
2.
Carefully let the cover rotate in order to release the
spring tension. Remove the old starter cord.
3.
Fit the new starter cord.
4.
Check the gasket between the fuel tank cover and
the protective cover.
5.
Oil the starter pulley's needle bearing.
6.
The starter spring should be fixed in the starter
pulley when fitting the starter pulley and the
protective cover.
16
www.CrowderSupply.com • Toll Free: 888-883-5144
© 2005 Atlas Copco Construction Tools AB
Pionjär 120/120AV 130/130AV
7.
Wind all of the cord on to the starter pulley.
8.
Pre-tension the starter spring by turning the pulley
clockwise by approx. 360° relative to the cover
before mounting the assembly.
9.
Pull the starter handle carefully in order to locate
the cover correctly.
10.
Fit and tighten the nuts for the protective cover.
| |
No 9800 0438 51 2005-10-31