Safety Feature - Eurosystems M220 Instrucciones Para La Utilización

cord, the cultivator or mower must not move. (If this happen, adjust with the corresponding register).
5. During operations you need to use ear protectors, sturdy footwear and long trousers should be worn.
6. When running the machine on its set of wheels on a path, switch off the motor and wait until the cultivator blades stop.
7. Maintenance and cleaning work on the machine, as well as adjustment of the brake shoe or set of wheels, must only be carried out with
the motor switched off and the cutting tool stopped. Remove the sparkplug .
8. When leaving the machine or leaving the guide handles the motor should be switched off.
9. The operator must always hold the handlebar when working.
10. It is essential to have the machine checked professionally if it comes to a sudden stop, for example, as a result of hitting an obstacle (gear
damage, bent blades).
11. Machines with an internal combustion engine must never be operated in closed rooms because of poisoning danger.
12. WARNING !! The petrol/gasoline is highly inflammable. Store fuel only in containers specifically designed fort he storage of such materials.
Don't fill the tank neither in closed areas, nor when engine is on, don't smoke and be careful to the petrol/gasoline loss from the tank. In case
of leak, don't try to switch the engine on but move the machine away from the area in order to avoid ignition source until the gasoline vapours
fade away. Re-place the tank caps and the gasoline box. Never open the cap of the fuel tank, or add fuel, while the engine is running or the
unit is hot.
13. The exhaust and parts close to it can heat up to 80° Celsius. Attention: Burnhazard!
14. Please note that our company assumes no responsibility for damages due to: a) repairs made by unspecialized personnel or unauthorized
after-sales service centers, or b) use of other than ORIGINAL SPARE PARTS. The same conditions apply to the accessories.
INSTRUCTIONS FOR OPERATING
INSTRUCTIONS - MOTOR
PUTTING INTO OPERATION
starter handle until you feel the resistance due to compression, let the starter rope run back slowly, and then give it a hefty pull (a full arm's length) to
start the engine. Keep hold of the starter handle and let the rope run back slowly. To stop: Put the accelerator lever into STOP position.

SAFETY FEATURE

All motor-cultivators are provided with a safety feature which acts. The device causes the transmission to disconnect
automatically anytime the respective control lever is released.
TRANSPORT
A forklift truck should be used to move the machine. The forks should be opened as far as possible and inserted into the pallet. The
weight of the machine is given on the Manufacturer's data plate together with the other technical information.
HOW TO ASSEMBLE YOUR MOTOR-CULTIVATOR
in a packing case. For assembly to be completed, the step by step procedure is as follows.
INSTALLING THE HANDLEBARS (Fig. 2)
Please follow the motor manufacturer's operating instructions.
Make sure, operating levers are in "off" position. Put throttle into "start" position. Pull on the engine
Unless otherwise agreed, the motor-cultivator is delivered disassembled and placed
Fix the handlebars (Fig. 2, detail 1) to its mount (2) using screws (3). Important! The larger
9