Remote Control - GYS PROTIG 201 AC/DC Manual De Instrucciones

Translation of the original instructions

REMOTE CONTROL

The analog remote control operates in TIG and MMA processes.
Ref. 045699
1- Plug the remote control into the connection at the back of the machine.
2- The HMI detects the presence of a remote control and offers a selection between a "pedal" type remote control and a "potentiometer" type remote
control, accessible via the main incremental encoder.
Connection:
The product is equipped with a female socket for a remote control.
The specific 7 pin male plug (option ref.045699) enables connection to the different types of manual remote control or foot pedal. For the cabling
layout, please see the diagram below.
Type of remote control
Foot pedal
Operation:
• Manual remote control (option ref. 045675) The manual remote control allows the current to be varied from 50% to 100% of the set current.
In this configuration, all modes and functions of the machine are accessible and can be set.
• Foot pedal (option ref. 045682) :The pedal control enables variation of the current from the minimum current to 100% of the set intensity.
In TIG, the welding machine only operates in 2T mode. The upslope and downslope are not automatically managed by the current source, and are
controlled by the user with the foot pedal.
FAN
The station integrates a controlled fan system.
VERSION WITH INTEGRATED COOLING UNIT: 201L AC/DC
The protections supported by the cooling unit to ensure the protection of the torch and the user are:
• Coolant thermal protection
The hot and cold liquid connections are marked with coloured rings, respectively red and blue. At the back of the station, a gauge is used to visually
determine the level of liquid in the tank.
Make sure the unit is disconnected from the power supply before connecting or disconnecting the fluid inlet and outlet
hoses from the torch.
The coolant is harmful and irritates the eyes, the mucous membranes and the skin. Hot liquid may cause burns.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported.
28
PROTIG 201 AC/DC - 201L AC/DC
Manual remote control
External view
Wire description
10 V
Cursor
Common/Earth
Switch
Electric diagram according to the remote
control type.
Pin
A
B
C
D
EN