Cleaning And Maintenance; Safety Information; Cleaning - CASO DESIGN FastVac 500 Operación Manual

► Put the power cord into the storage box which is in the back of
the machine. Do not wrap the cord around the appliance.

18 Cleaning and Maintenance

This chapter provides important information on properly cleaning
and maintaining your vacuum sealer.

18.1 Safety information

ATTENTION
Please observe the following safety notices, before cleaning the unit to avoid damage to
the unit or personal injury:
► To ensure optimum performance, the unit must be cleaned regularly. Failure to clean
the unit regularly can lead to potential malfunctions, as well as safety and health risks.
► Unplug the device before to cleaning. The sealing strip remains hot after use. Wait a
few minutes until the strip has cooled before cleaning.
► Clean the unit after every use as soon as it has cooled. Leaving the unit uncleaned for
long periods can make it very difficult to remove leftover food and grime and may even
damage the unit.
► If moisture penetrates the unit's housing, it can damage the electronic components.
Please ensure that no moisture enters the device.
► Do not use any harsh or abrasive cleaning agents.
► Do not attempt to scrape off stubborn grime with hard or abrasive tools.
► Dry all parts thoroughly before using after cleaning.
► Never immerse the device in water or other liquids and do not place in the dishwasher.

18.2 Cleaning

◆
Outside of the unit
• Wipe with a damp cloth or sponge and mild dish soap.
◆
Inside of the unit
• Wipe away any food or liquids with a paper towel.
◆
Cleaning bags for reuse
•
Wash the bags in warm water with a mild dishwashing soap, then rinse them well and
allow them to dry completely before reusing
ATTENTION
► Bags used to store raw meats, fish or greasy foods should never be reused due to risk
of contamination.
◆
Sealing profile (which presses the bag against the sealing bar)
Remove the sealing profile and clean it in warm soapy water.
Please note
.
46