Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Install Appliance
Note: The appliance is heavy. It is advisable to insert
it together with a second person.
NOTICE: Before installing the oven, be sure to verify
the cabinet dimensions and electrical connections.
Mount to Cabinet
If there is no fitted shelf above the appliance, secure
the appliance against tipping over when the door is
opened. Fit two standard angles
the appliance at 17
3
/
" (450 mm) depth inside the
4
cabinet.
1
Do not kink or trap the connecting cable, or route
it over sharp edges.
2
Centre the appliance.
There must be an air gap of
the appliance and adjacent cabinets.
3
Using a spirit level, adjust the appliance so that it
is perfectly level.
8
3
/
" (5 mm) above
16
/
" (5 mm) between
3
16
4
Screw the appliance into place. Remove the
transportation lock from the door.
Connect Electrical Supply
Three wire connection
BO 450/451-610
1
Connect red wire from oven to red electrical
supply wire (hot wire).
2
Connect black wire from oven to black electrical
supply wire (hot wire).
3
Connect yellow/green ground oven wire to bare
ground electrical supply wire.
Attach flexible conduit to the junction box.
To facilitate serviceability, the flex conduit must not be
shortened and should be routed to allow for temporary
removal of the oven.
Publicidad
Tabla de contenido
