Removing Packaging; Install Appliance; Mount To Cabinet - Gaggenau BOP 250 611 Instrucciones De Instalación

Removing Packaging

NOTICE: To prevent damage to your floor keep the unit
in its packaging base until ready to be placed in the
cabinet opening. Do not slide the unit across the
flooring.
Different models use different packaging materials.
Actual brackets may look differently. Bracket remains in
packaging base.
1 Cut straps on outside of box.
2 Remove cardboard box.
3 Remove all top and side cardboard and Styrofoam
braces.
4 Place oven in front of cabinets where it is to be
installed.

Install Appliance

Note: The appliance is heavy. It is advisable to install it
with a second person.
NOTICE: Before installing the appliance, be sure to
verify the cabinet dimensions and electrical
connections.

Mount to Cabinet

Notes
‒ When installing two appliances side-by-side, the
door handles must be in the center.
‒ If there is no fitted shelf above the appliance,
secure the appliance against tipping over when the
door is opened. Fit two standard angles
above the appliance at 17
inside the cabinet.
1 Do not kink or trap the connecting cable, or route it
over sharp edges.
2 Centre the appliance.
There must be an air gap of
the appliance and adjacent cabinets.
3 Using a spirit level, adjust the appliance so that it is
perfectly level.
/ " (5 mm)
3
16
3 / " (450 mm) depth
4
3 / " (5 mm) between
16
7