Blomberg WM 26110 NBL00 Guía De Usuario & Instrucciones De Instalación página 82

Washer does not work.
No light is on.
The washer did not start
after the program was
selected and the "Start/
Pause/Cancel" button
was pressed.
"Washing" and "Start/
Pause/Cancel" lights are
flashing after the program
is started.
Program cannot be star-
ted or selected.
Is there power at the outlet?
Washer might be unplugged.
An extension cord may be used.
The "On/Off" button might have
not been pressed.
The front door may be ajar.
Water may have been cut off /
Faucets may be turned off / Water
inlet hose may be folded/ Water
inlet strainers might be clogged.
Washer may have switched to
self protection mode due to an
infrastructure problem (such as line
voltage, water pressure, etc.).
82
Call an electrician and have the power outlet
/ circuit breaker / fuse checked.
Plug the power cord to a live and grounded
electrical outlet.
Do not use an extension cord.
This button must be pressed.
You can restart your washer by pressing the
"Start/Pause/Cancel" button for a short time
after ensuring that the water is not cut off.
Reset your washer by pressing "Start/
Pause/Cancel" button for 3 seconds. (see,
Cancelling a Program)
ES