The level of protection against water and dust to IP54, which means protection against
splash and dust. Do not immerse the vehicle in water, there is a risk of permanent damage
to the unit.
UTILIZATION
Battery and power supply equipment may not be disposed of together with normal
household waste, we respect your contribution to ecology through the use of electric
vehicles, allowing you to reduce the amount of exhaust gas. Please pass the electric scooter
and all appropriate components (battery) for disposal in appropriate waste reception facility
problem. Please refer to the currently applicable regulations. If you have any questions, you
can contact the Distributor or customer after-sales service.
FILLING AND CHANGING TIRES
In the case of low tire pressure, or if the pressure in each tire is different, you must fill the air.
Air pressure in both tires should be the same. The default pressure in the front wheel is 2.8
Bar, rear wheel 2.5 Bar. If you need to replace the tires in connection with the breach, please
contact a representative or customer after-sales service (you can also go to the store.)
MAINTENANCE OF DISC BRAKES
Unscrew the clamping screw using M5 key, loosen
the screw in the clockwise direction, simply mount in
the opposite direction. First turn the key softly to the
left to loosen the brake. Hold the hand brake, pushing
the rear brake when attaching. Turn key M5 right until
a stable mounting of the brake. Let go of the brake to
returned automatically to its original position. Make
sure that no friction brake pad during the normal
rotation of the wheel.
MES127 – EN
13