The User Menu; Bluetooth Menu - Kettler Track S10 Manual De Instrucciones

| The User Menu / Bluetooth Menu

4. The User Menu

4.1 Your Personal Area
If you have selected an individual user, you will be taken to that person's User Menu. Here everything
revolves around personal training. The guest user's User Menu contains only the training programmes.
1
1 Repeat Last Workout
Selecting this menu item takes you directly to the last training programme which was be-
gun. This menu item is always preselected when entering the User Menu. Thus, the last
training is only one click away.
2 Training Programmes
In this menu item you will find all available training runs for your KETTLER Track Treadmill.
The individual runs are also described in the Running Guide, depending on the version of
the device.
3 Create a New Workout
With this training configurator you can easily create your own individual workout. More de-
tailed information can be found in the chapter „Creating a New Workout".
4 My Results
In this menu item you will find your personal overall performance, the result of your last
workouts, as well as your best performances over 3 km, 5 km and 10 km.
5 Personal Settings
Under Personal Settings, you can make all user-specific settings (for example, changes in
age or training level). Changes in this menu have no effect on the settings of other users and
thus correspond only to your individual wishes.
EN

5. Bluetooth Menu

For connection to the chest strap, tablet or PC
The KETTLER Treadmill can be linked with a KETTLER Smart Chest Strap, for example, which supports
Bluetooth® low-energy technology. In addition, the KETTLER treadmill can be connected to smart-
phones, tablets or PCs with Bluetooth v4.0 or higher in order to obtain a wide variety of training options
with the corresponding programmes or apps.
Connecting to a heart rate monitor
A short push on the Bluetooth button takes you to the Bluetooth setup menu to connect your heart rate
sensor to the training display. Complete this process by selecting the sensor found using the < > keys.
You can also delete a connected sensor here
If the sensor is connected, a message appears in the display. Press the Bluetooth button again to return
to the start menu. The heart rate sensor is now connected for a workout and can be used.
18 ENGLISH
2 3 4 5