Rowenta PU2530 Manual De Instrucciones página 7

Ocultar thumbs Ver también para PU2530:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 44
IN THE EVENT OF A PROBLEM
• Do not disassemble the appliance yourself. A poorly repaired appliance may be dangerous for the user.
• Check the troubleshooting table below before contacting an Approved Service Center:
Problem
The appliance does not
switch on.
The flow is a lot weaker
than before.
There is an unpleasant
smell coming from the air
outlet.
WARRANTY
Do not use the appliance and contact an Approved Service Centre if:
– your appliance has been dropped;
– your appliance or its power cord are damaged;
– your appliance no longer functions properly.
You can find a list of Approved Service Centres on the Rowenta international warranty card.
HELP PROTECT THE ENVIRONMENT!
Your appliance contains many materials which can be recovered or recycled.
Leave it at a local waste collection point or take to an approved service center so that it can be
processed.
These instructions can also be found on our internet site, at www.rowenta.com.
Check
Is the power cord connected?
Are all the display elements off?
Is there a power outage?
Does the filter need to be cleaned or
replaced?
Is the sensor lens covered with dust?
Solution
Connect the power cord to a plug
with the correct voltage.
Press the on/off button and select the
required function.
You can use your purifier once the
power turns on again.
Check the filter cleaning and
replacement frequencies and clean/
replace the filter(s) if necessary.
Check the filter cleaning and
replacement frequencies and clean/
replace the filter(s) if necessary.
EN
7

Publicidad

Tabla de contenido
loading

Tabla de contenido