Festo CPE-PRS Serie Instrucciones De Utilizacion página 15

CPE...-PRS...
Carrying out the fitting
S
Make sure that the linked CPE...-PRS... are fitted free of distortion.
S
Leave sufficient space for the connections.
Fastening onto a hat rail
S
Tighten the locking screws of the
CPE...-PRS... to the hat rail.
Fastening onto a wall
S
Insert the following number of screws for
fastening:
Component
Sub-base
Extension plate
End plate
Fig. 10
Pneumatic
S
Use preferably round connectors of type QS..-... with cylindrical connecting
thread.
S
Connect the pneumatic tubing in accordance with the pressurization sketch
(compare with Fig. 3).
The connecting threads must be sealed (torques
Festo CPE...-PRS...-Z6 1204e English
Number of screws
required
2
1
2
Fig. 8
Fig. 9
Technical data).
15