USE & OPERATION
CONTROL KNOBS
SPEED / ON - OFF
Connect to the power supply and turn the Speed knob. The fan
will start. Change the speed from 1 for Low to 2 for Medium to
3 High. To switch OFF the unit turn the Speed know to 0.
COOL
To begin cooling the desired area turn the COOL switch ON.
The water pump will operate. You can feel the cooler air after
the Honeycomb media is completely wet.
SWING
Turn the SWING switch ON. The louvers will begin to move
from right to left automatically. Manually adjust the horizontal
louvers to change vertical airflow.
Horizontal Louvers
Manually adjust the horizontal louvers to change vertical
airflow.
10
0
3
2
1
SPEED
OFF ON
COOL
OFF ON
SWING