Hilti PR 30-HVSG Manual De Instrucciones Original página 24

Volume level submenu
Audible signal off
Volume level 1
Volume level 2
Volume level 3
Accuracy submenu
1 mm
2 mm
5 mm
10 mm
25 mm
Units submenu
Metric system
Imperial system
Menu information
Software versions
Service deadline
QR code
AUTO menu
Press the button once to open the AUTO menu.
Automatic alignment
Automatic alignment with surveillance function
Automatic scan line function
6.6 PRA 83 laser receiver with holder
1. Fit the laser receiver into the rubber sleeve of the PRA 83 at an angle from above.
2. Then press the laser receiver into the rubber sleeve until the sleeve surrounds the laser receiver
completely.
3. Fit the rubber sleeve onto the magnetic grip piece.
4. Press the
button.
5. Unscrew the clamping knob on the grip piece slightly.
6. Mount the PRA 83 laser receiver on a telescopic staff or leveling staff and secure it by tightening the
clamping knob.
▶ The laser receiver is ready for taking measurements.
16 English
1/16 in
1/8 in
1/4 in
1/2 in
1 in
15
2179604
*2179604*