Using Backup Exec With A Dr Series System (Windows); Ost Plug-In And Supported Versions; Installation Prerequisites For The Ost Plug-In For Backup Exec; Configuración Del Sistema Dr Series Mediante La Gui De Backup Exec - Dell DR Serie Manual De Instrucciones

c) View the operation details.

Using Backup Exec With a DR Series System (Windows)

This topic introduces the Dell OpenStorage Technology (OST) plug-in and describes its installation prerequisites for
Backup Exec within a Microsoft Windows environment. Once installed, Backup Exec can perform DR Series system
operations via the OST plug-in.

OST Plug-In and Supported Versions

This topic introduces the version 1.0 of the OST plug-in that supports the following versions of Backup Exec:
• Backup Exec 2010, Release 3
• Backup Exec 2012
Version 1.0 of the OST plug-in supports the following versions of the Windows media server:
• Windows Server 2003
• Windows Server 2008
• Windows Server 2008, R2
NOTA: For the latest information, see the
support.dell.com/manuals.

Installation Prerequisites for the OST Plug-In for Backup Exec

This topic introduces the installation prerequisites for installing the OST plug-in for Backup Exec on Windows media
servers. Ensure that you meet the following prerequisites prior to installing the Dell OST plug-in:
1. The Backup Exec installation must be running on one of the supported Windows platforms.
2. Dell recommends that the DR Series system appliance have an OST container created and configured. For details,
see Configuring an LSU.
3. The Windows OST installer must be present. If not, download the Windows installer (DellOSTPlug-in.msi), which is
available at support.dell.com/support/drivers, to a network directory location you can access.
4. The Dell OST plug-in needs to installed in the following directory on the designated Windows-based media server
running the supported Microsoft Windows operating system software ($INSTALL_PATH\VERITAS\NetBackup\bin
\ost-plugins) for NetBackup installations.
Configuración del sistema DR Series mediante la GUI de Backup Exec
Backup Exec sólo admite el uso de su propia interfaz gráfica de usuario (GUI) para configurar el sistema DR Series. No
existe ninguna interfaz de línea de comandos (CLI) de Backup Exec admitida para usar Backup Exec versión 2010.
Para configurar el sistema DR Series usando la GUI de Backup Exec, haga lo siguiente:
1. Inicie la consola del Administrador de Backup Exec, seleccione Tools (Herramientas) y Backup Exec Services...
(Servicios de Backup Exec...).
2. Seleccione el servidor que desea configurar en la página Backup Exec Services Manager y seleccione Start all
services (Iniciar todos los servicios).
3. Verifique que todos los servicios se hayan iniciado y haga clic en OK (Aceptar).
4. En la página Connect to Media Server (Conectarse al servidor multimedia), inicie sesión en el servidor multimedia,
especifique un User name (Nombre de usuario), una Password (Contraseña) y haga clic en OK (Aceptar).
5. En la página Backup Exec Administrator (Administrador de Backup Exec), haga clic en Network (Red) y en Logon
Accounts (Cuentas de inicio de sesión).
Dell DR Series System Interoperability Guide , available at
149