Setting Up The Macsquant® X Orbital Shaker With A Macsquant - Miltenyi Biotec MACSQuant Manual De Usuario

Setting up the MACSQuant ® X Orbital Shaker with a MACSQuant
2.2
X
Read the MACSQuant X User manual before using the MACSQuant X Orbital Shaker.
1 Remove the single-tube holder.
2 Locate the indentations at each corner of the MACSQuant X Orbital Shaker base plate.
3 Place the MACSQuant X on the base plate. Ensure that the rubber feet of the instrument fit into the
indentation. The front side of the instrument is directed towards the Orbital Shaker unit.
4 Connect the CAN plug to the power CAN port located at the rear side of the MACSQuant X
Instrument.
Note: Refer to the MACSQuant X User manual to locate the ports on the MACSQuant X.