Technical Data And Specifications - Miltenyi Biotec MACSQuant Manual De Usuario

4

Technical data and specifications

Parameter
Footprint
Height
Weight
Current
Input voltage
Connector pins
Working temperature
Humidity
Altitude
Emission sound pressure level at workstation
Table 4.1: Technical specifications of the MACSQuant X Orbital Shaker.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna,
l
Increase the distance between the equipment and the receiver,
l
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected,
l
Consult the dealer or an experienced radio/TV technician for help.
l
Changes or modifications of the instrument, unless expressly approved by Miltenyi Biotec, may void your
authority to operate the instrument pursuant to FCC 47 CFR.
For other safety considerations, refer to the product label, or visit www.miltenyibiotec.com.
Specification
650 × 450 mm (w × d)
125 mm
8 kg
Max. 5 A
24 V DC
Pin 1: CAN-L
Pin 2: CAN-H
Pin 3: GND
Pin 5: 24 V DC, 1.1 A
A1: 24 V DC, 5 A
A2: GND
+20 °C to + 25 °C
0% to 85% relative humidity, non-condensing
Max. 2000 m
<70 dB(A)
4
39