About Event Treatment - Christie LX1750 Manual De Instrucciones

Chapter 3 Basic Operation

About event treatment

If the PJ Network Manager receives an event, it executes the following event treatment
items which are selected in the system default setting.
p Sound warning alarm
p Send e-mail
p Display warning dialog
Sound warning alarm
If the PJ Network Manager receives an event, the computer beeps an alarm sound. The
alarm sound depends on your computer sound setting.
0 The alarm sound is not made when your computer does not have any speakers or the sound vol-
ume is muted.
Send e-mail
The following example message is sent to the e-mail address you set up as the destination
mail address.
0 For more information on the event, type, warning column and warning values, see the item
"Viewing the event log" (+p.23).
0 For setting event treatments, refer to item "Setting up default setting" (+p.17).
Notes on using Windows XP Service Pack 2 (SP2) / Windows Vista / Windows 7
Windows Firewall is turned on by default in Windows XP SP2, Windows Vista, and Windows 7. Due
to this Windows Firewall, the send e-mail function is not available. When using this mail func-
tion, you need to cancel the block for PJ Network Manager application. For further details about
Windows Firewall, see Windows help on your computer.
26
From: Test1<admin@abc.xxx.com> (management
file name)
Date : 2004/10/29 21:30
To : user@abc.xxx.com
Subject : Alert message
----------------------------------------------------------
Alert has occurred
* Accrual date : 2004/10/29 21:13:42
* Target name : Proj_10
* IP address : 192.168.1.101
* Event : ALERT
* Type : ON
* Warning column : Power status
* Warning value : Power failure
PJ Network Manager for Windows
020-000640-01 Rev.1 (11-2013)