EN
This Meliconi HP400 infrared stereo headphones system lets you enjoy high quality stereo sound from your TV or
most common audio reproduction equipment. It uses exclusive, advanced audio transmission technology - High
Defi nition Sound (HDS) – that converts the TV audio output into a beam of infrared light (IR) which is transmitted
wirelessly to a receiver. This technology signifi cantly increases the range of the Meliconi headphones: This
means that you can listen to clear speech and stereo sound wherever you are in the room, provided that you
remain in visual contact with the transmitter. The transmitter may be connected to your TV and other audio
sources such as DVD and Blu Ray players, CD players, HiFi systems, radios, PCs or notebooks.
- The unit may only be used with rechargeable batteries of the type provided.
- In order to avoid the risk of fi res or electric shocks, do not expose the unit to drops or splashes, and do not
place any items containing liquids, such as vases, on top of it.
- In order to avoid electric shocks, do not attempt to open the external cover.
- Do not attempt to repair the headphones; all repairs should be carried out by qualifi ed personnel.
- Prolonged exposure to furniture polish can cause the rubber feet mounted on the transistor to deteriorate,
which could, in turn, stain the furniture. In order to prevent this, place the transmitter on top of a mat or a
small cushion.
- Do not install the device in enclosed spaces, such as bookcases or cupboards.
- Do not expose the batteries or the device where the batteries are installed to sources of excessive heat, such
as direct sunlight, stoves, radiators, fi res or similar.
- Since the main power supply plug is used to disconnect the power supply from the main switch, make sure
that it is connected to an easily accessible socket. In the event of a fault with the power supply, disconnect it
from the socket immediately.
- This sound system is intended for personal and domestic use only.
In order to avoid hearing damage, do not use the headphones at high volumes for prolonged periods
The product has been checked and conforms to the applicable European Directives:
LVD directive 2006/95/EC (low voltage)
EMC directive 2004/108/EC (electromagnetic compatibility)
ErP directive 2009/125/EC (energy saving)
RoHS
REACH
The EC Declaration of Conformity is available from the Manufacture and the website www.meliconi.com/HP400.
The crossed out wheelie bin symbol that appears on the device or its packaging indicates that the
product must be disposed of separately from household waste at the end of its working life. Therefore,
at the end of the device's life, you must take it to appropriate centres for the differentiated collection of
electrical and electronic waste, or return it to the retailer when purchasing a new device of equivalent
type, on a one-for-one basis. Suitable differentiated collection to allow subsequent recycling of the
decommissioned device, with environmentally-compatible treatment and disposal, help to prevent any
negative effects on the environment and health and to promote the recycling of the materials of which
the device is made. Improper disposal of the product by the user will be subject to the sanctions in
Legislative Decree No. 22/1997 (article 50 and subsequent articles of Legislative Decree No. 22/1997).
IMPORTANT: Make sure that the polarity is correct when fi tting the batteries. Do not attempt to
dismantle them or dispose of them in a fi re. Do not mixed new and used batteries, or different types or
brands of batteries together. Do not dispose of batteries in the environment. Incorrect use may harm the
environment and give rise to health and safety hazards. The wheelie bin symbol, which also appears
on the battery, indicates that it must be disposed of in accordance with the applicable regulations (CE
2006/66): fi nd out about the regulations governing the disposal of used batteries and accumulators in
your country.
HP400
HP400
Thank you for purchasing a Meliconi product
Warnings
13