User Responsibility; Customer Service - CONCOA ADI 2062M Instrucciones Para La Instalación Y Operación

USER RESPONSIBILITY

This equipment will perform in conformity with the description contained in
this manual and accompanying labels and/or inserts when installed, operated,
maintained, and repaired in accordance with the instructions provided. This
equipment must be checked periodically. Improperly working equipment should
not be used. Parts that are broken, missing, worn, distorted or contaminated,
should be replaced immediately. CONCOA recommends that a telephone or
written request for service advice be made to CONCOA Customer Service in
Virginia Beach, Virginia, PHONE: 1-800-225-0473, FAX: 1-757-422-3125, or
E-MAIL: info@concoa.com.
This equipment or any of its parts should not be altered without prior written
approval by CONCOA. The user of this equipment shall have the sole
responsibility for any malfunction that results from improper use, faulty
maintenance, damage, improper repair, or alteration by anyone other than
CONCOA or a service facility designated by CONCOA.

CUSTOMER SERVICE

In the event of equipment failure, call CONCOA Customer Service. Please
be prepared to provide the model number and serial number of the equipment
involved, in addition to some details regarding its application.
Things to consider before removing the regulator from the
box....
1. Know the properties and special handling requirements of the gas being
used. Many gases are quite dangerous (flammable, toxic, corrosive,
simple asphyxiant, or oxidizers). Equipment failure or misuse may lead
to problems such as a release of gas through the relief valve or regulator
diaphragm. Proper safety measures should be established to handle
these and other component failures.
2. Be sure that the assembly purchased is suitable for the gas and type of
service intended. The system label provides the following information:
a. Model number
b. Serial number
c. Maximum inlet pressure
Be sure that the equipment received conforms to the order specifications.
The user is responsible for selecting equipment compatible with the gas
in use, and conditions of pressure, temperature, flow, etc. Selection
information can be found in CONCOA technical data sheets. In addition,
CONCOA representatives are trained to aid in the selection process.
3. Inspect the assembly upon receipt to be sure that there is no damage
or contamination. Pay particular attention to connecting threads.
While CONCOA assembles system components to exacting leak-
3