Vimar RS09 Manual Para El Conexionado Y El Uso página 16

RS09/RS09.120
Terminal number
14-17-20
13
15
16 Opening-only button input, dedicated for timer or detector for magnetic induction coils
18
19
21
22
23
3.4- Connecting control buttons and key switch,
connected in parallel are operated) the APCH input controls opening or closing the gate completely, the APED input controls partial gate opening or
closing:
Button controlling APED
3.5- Connection of timer or detector with magnetic induction
induction detector are operated) the OPEN input commands full opening of the gate, until the contact is closed, the gate opens and remains in the open
position, the APCH, APED commands and saved remote controls are not active until the contact is reset from closed to open, after the automatic closing
time set with the PAUSE trimmer, the gate closes, this input is used to open and hold open the gate at the times of greatest influx:
14
Description
Control inputs common (permanent GND)
Opening limit switch input (with dip switch 2-1 OFF)
Closing limit switch input (with dip switch 2-1 OFF)
Sequential control input, to govern the complete travel of the gate
Sequential control input, to govern the pedestrian travel of the gate
Input for stopping the gate
Photocell input, active during gate closing
Input for edges or internal photocell, active during gate closing and opening
normally open contacts (the ap/ch or aped LEDs come on when the selector or the buttons
COM
with normally open contact (the open LED comes on when the timer or magnetic
12
1
11
2
10
9 3
8 4
7
5
6
TIMER
Fig. 7
EN
Input type
Normally closed
Normally closed
Normally open
Normally open
Normally open
Normally closed
Normally closed
Normally closed
COM
N.O. N.C. N.C. N.O.
-
Fig. 6