Hergom ARANDA Instrucciones Para La Instalación, Uso Y Mantenimiento página 55

6.-Draw valve position change
In order to attach the valve control to
the valve spindle, an M-5 nut and bolt
have been supplied and can be found
on the said valve spindle.
Once the oven has been installed, the
control element will be attached to the
spindle in one of the four positions
using the M-5 nut and bolt.
In the case of Aranda and Santacruz
on-site insert models, the valve
comes on the right-hand side of the
oven. It is very easy to change the
position of the valve if required to
adapt its position to the location
where the oven is to be installed.
Use a Philips screwdriver to remove
the eight screws that hold the head
of the valve cover to the roof of the
oven. Once removed, place the valve
in the desired position.
In order to assemble the valve in the
desired position,
screwdriver to
screws accordingly.
55
use a Philips
attach the eight