Best WC35 Serie Manual De Instrucciones página 18

EXTERNAL BLOWER
PROGRAMMING MODE PROCEDURE (WC35E)
Light Blower
Switch On / Off
The range hood is designed to work with
several different blower models. Before
using, the control must first be programmed
to your blower model, in order to achieve
proper operating speeds.
From the chart below:
1. Find the SETUP number that
corresponds to the blower model that is
installed with your range hood.
2. The control is factory-preset to SETUP
3. If your blower model is listed under
SETUP 3, no programming is required
and the range hood is ready to use.
SETUP
BLOWER EB6
MODEL ILB3
NUMBER ILB6
Blower
Blower
Speed 2
Speed 3
SETUP SETUP
(default)
EB12 EB9
EB15 ILB11
ILB9
- 18 -
Blower
Speed 4
3. To program blower models listed under
SETUP 1 and 2:
A) Power must be supplied to the
hood. The blower and lights must be
turned off.
B) Press and hold
+
times. After 1 second,
or will light up to indicate the
current setting.
C) Select the proper SETUP for your
blower from the chart at left. Press
,
proper SETUP. Then press
confirm and store the new setting.
D) The range hood is now ready to use.
Time Filter
Delay Reset
FIG. 26
for 5 seconds.
+
will flash 3
,
or to select the
to