Troubleshooting
(Continued)
• SD card is full. Delete unnecessary
files or replace the SD card.
• Insert a commercially
available SD card, and set each of the
[VIDEO SLOT SELECTION]
and [IMAGE SLOT SELECTION]
to
[SLOT A] or [SLOT B].
• Recording stops automatically
after 12 hours of non-stop recording.
To ensure continuous
recording,
set [AUTO SWITCH
REC MEDIA]
to [ON] before you start recording.
• Sometimes playback
is interrupted
at the connecting
section
between two scenes. This is not a malfunction.
• Select [PLAYBACK
MPG FILE] then search the video on the index
screen.
(Video files that have damaged
management
information
can be
played
back.)
• Cancel group display and date search functions.
• Change
the setting
in [VIDEO SLOT SELECTION]
or [IMAGE
SLOT SELECTION].
(Files on other media are not displayed.)
• If there are many files (such as video) in the camcorder,
it takes
time for the camcorder
to respond. It is recommended
that you
copy all files from the camcorder
onto your computer,
and erase
the files from the camcorder.
• Check the remaining
battery pack charge.
(When the battery pack is fully charged, the lamp does not flash.)
• When recharging
in either a hot or cold environment,
ensure that
battery is being charged within the permitted temperature
range.
(If the battery pack is being recharged outside the permitted
temperature
range, recharging
may stop to protect the battery
pack.)
• You need your YouTube
TM
account to upload files to YouTube
TM.
Create your account.
• Refer to "Q&A", "Latest Information", "Download
Information",
etc.
in [Click for Latest Product Info] in the help of the provided Everio
MediaBrowser
software.
• Refer to "Q&A", "Latest Information", "Download
Information",
etc.
in [Click for Latest Product Info] in the help of the provided Everio
MediaBrowser
software.
[] To reset the camcorder
when
it does not operate
normally
(lb Close the LCD monitor
and remove the power supply
(battery
pack or AC adapter)
from
the camcorder,
then reattach
it.
(2_, E xecute
[FACTORY
PRESET].