• For s afety, DO NOT
... o pen the camcorder's
chassis.
... d isassemble
or modify
the unit.
... a llow i nflammables,
water ormetallic
objects
toenter the unit.
... r emove
the battery
pack or disconnect
the
power supply
while the power
ison.
... l eave the battery
pack attached
when the
camcorder
isnot inuse.
... p lace naked
flame sources,
such as lighted
candles,
on the apparatus.
... e xpose
the apparatus
todripping
or splashing.
... l eave dust or metal objects
adhered
tothe
power plug o r an AC wall outlet.
... i nsert any objects
inthe camcorder.
•
Avoid using the unit
... in places subject to excessive
humidity or dust.
... in places subject to soot or steam such as
near a cooking
stove.
... near appliances
generating
strong magnetic
or electric fields (speakers, broadcasting
antennas, etc.).
... in places subject to extremely
high (over 40°C
or 104°F) or extremely
low (under 0°C or
32°F) temperatures.
•
DO NOT leave the unit
... in places of over 50°C (122°F).
... in places where humidity is extremely low
(below 35%) or extremely high (above 80%).
... in direct sunlight.
... in a closed car in summer.
... near a heater.
... in high places such as on aTV. Leaving the
unit in high places while a cable is connected
may result in a malfunction
if the cable is
caught and the unit falls onto the floor.
... place the camcorder
in dusty or sandy areas,
such as on a beach.
•
To protect the unit, DO NOT
... allow it to become wet.
... drop the unit or strike it against hard objects.
... subject it to shock or excessive
vibration
during transportation.
... keep the lens directed at extremely bright
objects for long periods.
... expose the lens to direct sunlight.
... swing it excessively
when using the hand
strap.
... swing the soft camcorder
case excessively
when the camcorder
is inside it.
•
To prevent
the unit from dropping,
® Fasten the grip belt securely.
• When using the camcorder with a tripod, attach
the camcorder to the tripod securely.
If the camcorder
drops, you may be injured
and the camcorder
may be damaged.
When a child uses the unit, there must be
parental guidance.
Declaration
of Conformity
Model Number: GZ-MS120AU/BU/RU
Trade Name: JVC
Responsible
party: JVC AMERICAS
CORn
Address:
1700 Valley Road Wayne, N. J. 07470
Telephone Number: 973-317-5000
This device complies
with Part 15 of FCC
Rules. Operation
is subject to the following
two conditions:
(1) This device may not cause
harmful interference,
and (2) this device must
accept any interference
received, including
interference
that may cause undesired
operation.
Changes or modifications
not approved
by JVC could void the user's authority to
operate the equipment.
This equipment
has
been tested and found to comply with the
limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules.These
limits are
designed to provide reasonable
protection
against harmful interference
in a residential
installation. This equipment
generates,
uses,
and can radiate radio frequency
energy and, if
not installed and used in accordance
with the
instructions,
may cause harmful interference
to radio communications.
However, there is
no guarantee that interference
will not occur
in a particular
installation.
If this equipment
does cause harmful interference
to radio or
television reception, which can be determined
by turning the equipment
off and on, the
user is encouraged
to try to correct the
interference
by one or more of the following
measures: Reorient
or relocate the receiving
antenna. Increase the separation
between the
equipment and receiver.
Connect the equipment
into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced
radio/TV
technician for help.
This Class B digital apparatus
complies
with
Canadian
ICES-O03.
Cet appareil numerique de la classe Best
conforme&
la norms NMB-O03 du Canada.
43