Al Edit Recording; Karaoke Program - Aiwa NSX-A999 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Use the remote control,
RANDOM play
All the tracks on the selected disc or all the discs can be played
randomly.
REPEAT play
A single disc or all the discs can be played repeatedly.
Press RANDOM/REPEAT.
Each time it is pressed, the function can be selected cyclically.
RANDOM play — RANDOM lights up on the display.
REPEAT play — ~
lights up on the display.
RANDOM/REPEAT play — RANDOM and C& light upon the
display.
Cancel — RANDOM and G disappear from the display.
To dav all discs, press ~>
to start play,
To play a single disc, press DISC DIRECT PLAY, then press
numbered buttons 1-3 to start play.
m
During random play it is not possible to skip to the previously
played track with 4+.
BLANK SKIP PLAY
The silent portions between tracks recorded on a CD can be
skipped during playback.
1 Press CD BLANK SKIP.
"CD BLANK SKIP ON" is displayed and a small dot appears
in the display.
2 Press <›
to start playback.
The silent portions between tracks will be skipped, and the
sound will be played back without interruption. If a track fades
out (ends with the sound gradually decreasing), the fadeout
portion also will be skipped.
To return to normal playback
Press CD BLANK SKIP again, and "CD BLANK SKIP OFF is
displayed and the dot in the display disappears.
There may be a case where BLANK SKIP PLAY does not
function correctly.
BLANK SKIP PLAY is automatically canceled when performing
Al EDIT RECORDING
(page 22), PROGRAMMED
EDIT
RECORDING (page 23), or recording during PROGRAMMED
PLAY (page 19) or RANDOM PLAY (page 19).
[Jp to 30 tracks can be programmed from any of the inserted
discs.
~
1
2,3
2
5
+4
w
Iuse the
remote
control.
1
2
3
Press PRGM twice in stop mode.
"PRGM" is displayed
PRGM
When PRGM is pressed once in step 1, the unit enters the
KARAOKE PROGRAM (page 25).
Press DISC DIRECT PLAY, then press 1-3 within
3 seconds to select a disc.
Go to the next step when the tray stops rotating.
Press numbered buttons O-9 and +10 to program
a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +1O and O.
Selected track number
Total number of selected tracks
of the' se'lec{ed tracks
4
Repeat steps 2 and 3 to program other tracks.
5 Press 4P
to start play.
To check the program
Each time ~
or ~
is pressed in stop mode, a disc number,
track number, and program number will be displayed.
To clear the program
Press
CLEAR in stop mode,
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last track.
To change the programmed
tracks
Clear the program and repeat all the steps again.
To play the programmed
tracks repeatedly
After programming
the tracks,
press RANDOM/REPEAT
repeatedly until ~
appears on the display.
m
During programmed play, you cannot perform random play,
check the remaining time, and select a disc or track. "Can't
USE is displayed if you attempt to select a track.
"FULL' is displayed if you attempt to program more than 30
tracks.
ENGLISH I
9

Publicidad

Tabla de contenido
loading

Tabla de contenido