Publicidad
Idiomas disponibles
Idiomas disponibles
CLUTCH INSTALLATION AND
ADJUSTMENT GUIDE
Read Carefully Before Installing Clutch.
This clutch must be installed by a qualified installer. Improper installation or failure to replace or resur-
face the flywheel, or to replace the pilot bearing, clutch brake or other worn components may cause poor clutch release
or early failure and void the manufacturer's warranty.
All 14" clutches use 8 spring disc assemblies and can only be used with a 7" bore flywheel.
For 15 ½" clutch units, measure the flywheel opening to determine the correct clutch is being
used for the application.
Flywheel bore size
7"
7.25
BORE
8½"
8.562
BORE
10"
9.750
BORE
CHOOSING THE WRONG CLUTCH FOR THE APPLICATION VOIDS THE WARRANTY!
Manually adjusted clutches are not recommended to be installed in vehicles with hydraulic linkage systems.
Insert #M1001
STOP!
Must Use
8 Spring Disc
10 Spring Disc
7 & 9 Spring Disc
1
{
Easy Pedal Effort choices
Use one of these
MAF-108391-81
models only
{
Easy Pedal Effort choices
MAF-108391-74
Use one of these
MAF-108391-93
models only
MAF-108391-93H
{
Easy Pedal Effort choices
MAF-108925-25
MAF-108925-32H
Use one of these
MAF-108925-82
models only
MAF-108935-51 (Mack)
MAF-108935-91 (Mack)
Publicidad
