Descargar Imprimir esta página

Hazardous Materials - Ivoclar digital PrograPrint PR5 Guía Breve

Publicidad

Idiomas disponibles

Idiomas disponibles

English
Connect the printer to a separately secured circuit or make sure that no devices are
connected that cause severe supply voltage fluctuations when switched on. These
fluctuations interfere with the electronic controls and may cause failure of the system.
Disconnect power before cleaning and maintenance work approved to be performed by
the user.
If you need to disconnect the unit from the power supply at a later time: Disconnect the
plug from the protective-contact mains socket, not on the device.

2.7.4 Hazardous materials

Incorrect handling of the device, the accessories or non-compliance with the processes
described in these Operating Instructions may lead to contact of the user with unpolymerized
material. This may result in health damage, e. g. skin irritations.
Depending on the material, there is a risk of skin irritations, allergic reactions or respiratory
diseases without the corresponding safety precautions.
Observe the Instructions for Use of the materials used ("Document of equal applicability
and required files", page 7).
Wear protective gear ("Personal protective equipment", page 11).
Make sure that the room is sufficiently ventilated when working with the materials or
handling the material bottles.
16

Publicidad

loading