Clutch Backlash Adjustment; Spark Plug Inspection - Benelli BN 600 GT Manual Usuario

CLUTCH BACKLASH ADJUSTMENT

The clutch lever backlash needs to be
10-0-15.0 mm as shown in the igure.
10.0-15.0 mm
Check the clutch lever backlash regular-
ly and adjust as necessary.
C A
1) Loosen the clutch ring nut "A" and the
clutch screw "C" on the cable, at the
same time.
2) To increase clutch lever backlash,
turn the clutch screw "C" clockwise
(seen from sitting on the bike).
To reduce the clutch lever backlash,
turn the clutch screw "C" anticlock-
wise (seen from sitting on the bike).
3) After adjusting, tighten the clutch ring
nut "A".
101

SPARK PLUG INSPECTION

Since the spark plug replacement and
check may be dificult for an operator
with little experience, we recommend
contacting an authorised Benelli work-
shop.
EN