Descargar Imprimir esta página

Victron energy SmartSolar MPPT 150/85-Tr Manual página 18

Ocultar thumbs Ver también para SmartSolar MPPT 150/85-Tr:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

5. Specifications
SmartSolar charge controller
Battery voltage
Maximum battery current
Maximum PV power, 12V 1a,b)
Maximum PV power, 24V 1a,b)
Maximum PV power, 36V 1a,b)
Maximum PV power, 48V 1a,b)
Max. PV short circuit current 2)
Maximum PV open circuit voltage
Peak efficiency
Self consumption
Charge voltage 'absorption'
Charge voltage 'float'
Charge voltage 'equalization'
Charge algorithm
Temperature compensation
Protection
Operating temperature
Humidity
Maximum altitude
Environmental condition
Pollution degree
Data communication port
Remote on/off
Relay (programmable)
Parallel operation
Colour
PV terminals 3)
Battery terminals
Protection category
Weight
Dimensions (h x w x d)
Safety
1a) If more PV power is connected, the controller will limit input power to the maximum power.
1b) PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter minimum PV voltage is Vbat + 1V.
2) A PV array with a higher sort circuit current may damage the controller.
3) MC4 models: several splitter pairs will be needed to parallel the strings of solar panels
16
MPPT 150/85
12/24/48V Auto Select (36V: manual)
85A
1200W
2400W
3600W
4900W
70A
150V absolute maximum coldest conditions
145V start-up and operating maximum
Less than 35mA @ 12V / 20mA @ 48V
Default setting: 14,4V / 28,8V / 43,2V / 57,6V
Default setting: 13,8V / 27,6V / 41,4V / 55,2V
Default setting: 16,2V / 32,4V / 48,6V / 64,8V
multi-stage adaptive
-16mV/°C / -32mV/°C / -64mV/°C
Battery reverse polarity (fuse, not user accessible)
PV reverse polarity / Output short circuit / Over temperature
-30 to +60°C (full rated output up to 40°C)
95%, non-condensing
Indoor, unconditioned
VE.Direct or Bluetooth
Yes (2 pole connector)
DPST
AC rating: 240VAC / 4A
Yes (not synchronized)
ENCLOSURE
Blue (RAL 5012)
35mm² / AWG2 (Tr models),
or three pairs of MC4 connectors (MC4 models)
35mm² / AWG2 or three sets of MC4 connectors
IP43 (electronic components)
IP22 (connection area)
Tr models: 216 x 295 x 103mm
MC4 models: 246 x 295 x 103mm
STANDARDS
MPPT 150/100
100A
1450W
2900W
4350W
5800W
70A
98%
2000m
PD3
DC rating: 4A up to 35VDC, 1A up to 60VDC
4,5kg
EN/IEC 62109

Publicidad

loading