Avigilon HD-H264-B1 Guia Del Usuario página 11

4. To adjust the video image, make changes to any of the
following settings as required.
Option
Exposure
Iris
IR Cut Filter
Flicker Control
Maximum
Exposure
Maximum Gain
Priority
Description
You can allow the camera to control the exposure by
Automatic,
selecting
exposure rate.
NOTE:
Increasing the manual exposure time may
affect the image rate.
You can allow the camera to control the iris by
Automatic
selecting
Open Closed
or
You can allow the camera to control the infrared cut
filter by selecting
Color Monochrome
or
If your video image flickers because of the fluorescent
lights around the camera, you can reduce the effects
of the flicker by setting the Flicker Control to the same
frequency as your lights. Generally, Europe is
and North America is
You can limit the automatic exposure setting by
selecting a maximum exposure level.
By setting a maximum exposure level for low light
situations, you can control the camera's exposure
time to let in the maximum amount of light without
creating blurry images.
You can limit the automatic gain setting by selecting a
maximum gain level.
By setting the maximum gain level for low light
situations, you can maximize the detail of an image
without creating excessive noise in the images.
Image Rate
You can set
priority.
Image Rate
When set to
the set image rate as the priority and will not adjust
the exposure beyond what can be recorded for the set
image rate.
Exposure
When set to
exposure setting as the priority, and will override the
set image rate to achieve the best image possible.
or you can set a specific
, or you can manually set it to
.
Automatic
, or set the camera to
mode.
60Hz
.
Exposure
or
, the camera will maintain
the camera will maintain the
50Hz
as the
7