Diagnostics; Led Status Displays - Lenze E94AYCIB Instrucciones Para El Montaje

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

8

Diagnostics

LED status displays

LED
Pos.
Colour
MS
green
MS
green
ME
red
BS
green
BE
red
DE
red
EDK94AYCIB DE/EN/FR/ES/IT 2.0
Condition
Description
flashes
The communication module is being supplied with voltage but is
not connected to the standard device. (The standard device has
been switched off in the initialisation phase or does not exist.)
on
The communication module is being supplied with voltage and is
connected to the standard device.
on
There is a fault in the area of the communication module.
off
The communication module is not active on the field bus. Data
cycles are not being executed.
flashes
Communication via the communication module has been set up.
The INTERBUS is active. Data cycles are being executed.
flashes
Impermissible setting:
l
Total number of data words (PD + PCP) > 10
l
Total number of data words (PD + PCP) = 0
The communication module has been initialised and is working
internally with the following values:
l
PD = 2 (words)
l
PCP = 1 (word)
on
INTERBUS communication interrupted. Data cycles are not being
executed.
on
The communication module is not accepted by the standard
device (see notes in the documentation for the standard device)
or the standard device is not active.
l
Diagnostics
LED status displays
E94YCIB001F
8
55

Publicidad

Tabla de contenido
loading

Tabla de contenido