Technical Features - MO-EL 766N Uso Y Mantenimiento

maintenance is required other than to ensure that there is no exces-
sive build-up of dust/dirt on the reflectors or emitters as this can
cause overheating and premature emitter failure. To clean the appli-
ance, wipe off with a damp cloth.
The accumulation of limestone or incrustations reduces the life and
the efficiency of the lamp; it is suggested therefore to avoid the con-
tinued use in presence of water or salt fog. Eventual leavings of salt
water will have to be removed before the use, after having discon-
nected the appliance, by means of soak in sweet water.
6. EMITTER AND SILICON BUMPERS REPLACEMENT
The emitters used in the Fiore are robust and if knocks and shock
vibrations are avoided, they will last for around 5000 hours. When
changing the lamp, also the silicon bumpers connected with the
lamp must be substituted. They should be substituted even before
if there are signs of aging. Due to the special sealing and anti-shock
design of the heater, the emitters are not intended to be user re-
placeable. Please ensure that all emitters are replaced via the Mo-El
service network.

7. TECHNICAL FEATURES

Power supply
Power
Insulation Class
Protection level
Lamp
Lamp life (hours)
Emission
Range (m )
2
Weight (kg)
Dimensions (mm)
766N-766NP
766NC-766LG
766NED-766NPED
766NCED-766LGED
220-230 V ~ 50-60 Hz 220-230 V ~ 50-60 Hz
1200 W
I
IP65
Quartz - tungsten wire
5000
IR-A
4÷6
0.95
712x112x83
15
767N-767NP
767NC
767NED-767NPED
767NCED
1760 W
I
IP65
5000
IR-A
8÷10
1
835x112x83