Connecting To The Esp-101 - ESAB Remote junction Box Manual De Instrucciones

SECTION 3
3.3 Connecting to the ESP-101
The Extension Cable is connected to the ESP-101 in the same manner as the PT-37 Torch.
1. Open extension cable lead access door on the left side of the ESP-101.
2. Insert the extension cable and air hose through the extension cable access opening on the front of
the console.
3. Connect the extension cable male receptacle (from Remote Junction Box) to the female receptacle.
Check orientation of the sockets so as to ensure a correct fit.
4. Connect the air hose (from Remote Junction Box) to the quick-connect fitting.
Quick-connect Fitting
Air Hose
5. Close the Extension Cable Lead access door.
Extension Cable and
Air Hose
Extension Cable Lead
Access Door
Panel Receptacle
Extension Cable Male
Receptacle
23
INSTALLATION
Extension Cable Access
Opening