Safety Precautions - OHAUS Scout SJX Serie Guia De Inicio Rapido

TM
Scout SJX Balances
Step-2 Install the Pan
For SJX/E:
Rectangular pan: Place diagonally on
sub-platform and rotate counter-
clockwise until it locks.
Round pan: Set straight down on
subplatform.
For SJX: Install the stainless steel pan
directly on the subplatform.
Step-3 Connect Power
Connect the AC Adapter to the balance
input jack.
Battery Installation
Install the Four "AA" (LR6) batteries
(not included) with polarity as shown in
the battery compartment.
Step-4 Level the balance
Level the balance before using by
adjusting the feet until the air bubble is
centered

SAFETY PRECAUTIONS

CAUTION: Read all safety warnings before installing, making connections, or
servicing this equipment. Failure to comply with these warnings could result in
personal injury and/or property damage. Retain all instructions for future reference.

Verify that the local AC power supply voltage is within the input voltage
range printed on the AC adapter's ratings label.

Only connect the AC adapter to a compatible grounded socket.

Position the instrument such that the AC adapter can be easily
disconnected from the socket.

Position the power cord so that it does not pose a potential obstacle or
tripping hazard.

Operate the equipment only under ambient conditions specified in the user
instructions.

Do not operate the equipment in hazardous or explosive environments.

Disconnect the equipment from mains power before cleaning or servicing.

Service should only be performed by authorized personnel.
TM
Scout SJX Balances
Quick Start Guide
AC Adapter Jack
ii Corporation www
For SJX/E
Battery
Compartment
.
ohaus.com