Lincoln B Serie Manual De Instrucciones página 34

Model 1200, 1240, 1242, 1242E, 1244, 1244E
PowerLuber Grease Gun
Declaration of conformity as defined by Machin-
ery Directive 98/37/EG Annex II A
This is to declare that the design of the
PowerLuber Grease Gun
in the version supplied by us, complies with the provisions of the
directive 98/37/EG
.
Applied harmonized standards in particular:
EN 292-1 Safety of machinery part 1 Basic terminology,
methodology
EN 292-2 Safety of machinery part 2 Technical principles
and
specifications
EN 809 Pumps and pump units for liquids Safety
requirements
EN 60204-1 Safety of machinery Electrical equipment of
machines Part 1: General requirements
Déclaration de la conformité comme définie par
l'annexe II A de Machinery Directive 98/37/EG.
Ce doit déclarer que la conception du
PowerLuber A Graisse
dans la version fournie par nous, se conforme aux dispositions du
98/37/EG directif.
Normes harmonisées appliquées en particulier
EN 292-1 Safety of machinery part 1 Basic terminology,
methodology
EN 292-2 Safety of machinery part 2 Technical principles
and
specifications
EN 809 Pumps and pump units for liquids Safety
requirements
EN 60204-1 Safety of machinery Electrical equipment of
machines Part 1: General requirements
St. Louis, MO 08/23/01, Paul Conley, Chief Engineer
Page Number - 34
Declaration of conformity according to EMV direc-
tive 89/336 EWG
We declare that the model of the
PowerLuber Grease Gun
in the version supplied by us, complies with the provisions of the
above mentioned directive.
Applied harmonized standards in particular:
EN 50081-1 Electromagnetic compatibility Generic emission
standard Part 1: Residential, commercial and
light industry.
EN 50082-2 Electromagnetic compatibility Generic immunity
standard Part 2: Industrial environment
EN 55022 Limits & methods of measurement of radio
interference charateristics of information
technology equipment.
EN 61000-3 Electromagnetic compatibility (EMC) Part 3. Lim-
its.
Section 2. Limits for Harmonic current emissions
(equipment input current < = 16A pep phase).
Section 3. Limitation of voltage fluctuations and
flicker in low voltage supply systems for equipment
Déclaration de la conformité selon la directive
89/336 EWG d'cEmv
Nous déclarons que le modèle du
PowerLuber A Graisse
dans la version fournie par nous, se conforme aux dispositions de
la directive mentionnée ci-dessus.
Normes harmonisées appliquées en particulier
EN 50081-1 Electromagnetic compatibility Generic emission
standard Part 1: Residential, commercial and
light industry.
EN 50082-2 Electromagnetic compatibility Generic immunity
standard Part 2: Industrial environment
EN 55022 Limits & methods of measurement of radio
interference charateristics of information
technology equipment.
EN 61000-3 Electromagnetic compatibility (EMC) Part 3. Lim-
its.
Section 2. Limits for Harmonic current emissions
(equipment input current < = 16A pep phase).
Section 3. Limitation of voltage fluctuations and
flicker in low voltage supply systems for equipment
St. Louis, MO 08/23/01, Paul Conley, Chief Engineer
Form 402022