Cylinder And Processing Hazards; Safety Placards-Cylinder And Processing Hazards - Milnor MWF Serie Manual De Instrucciones

BIUUUS26 (Published) Book specs- Dates: 20051111 / 20051111 / 20051116 Lang: ENG01 Applic: IFN HON

4. Cylinder and Processing Hazards

Safety Placards—Cylinder and Processing Hazards
4.1.
BIUUUS20]
One or more safety placards on the machine, similar to the following, alert personnel to hazards
related to the cylinder and laundering process.
Figure 5: Cylinder and Processing Hazards—Grasping Goods in the Machine
Riesgo de amputación.
El cilindro giratorio puede torcer
y arrancar los brazos.
Nunca trate de alcanzar o tirar
del material dentro de un cilindro
cuando este girando.
Figure 6: Cylinder and Processing Hazards—Confined Space
ADVERTENCIA
Riesgos de espacios
restringidos.
El encierro en un cilindro puede
resultar en lesiones graves o la
muerte.
No entre en los cilindros, a no
ser que sea necesario dar
servicio o limpieza.
Lea las instrucciones de
seguridad en el manual antes de
entrar en el cilindro.
Figure 7: Cylinder and Processing Hazards—Moving Parts Behind Shell Door
Riesgo de
aplastamiento.
Pueden causar lesiones
graves.
Mantener manos y dedos
alejados de las piezas
Amputation hazard.
Turning cylinder can twist
off arms.
Never reach into or pull
linen from a turning cylinder.
WARNING
Confined space hazards.
Confinement in cylinder could
result in serious injury or death.
Do not climb into cylinder
unless servicing or cleaning is
necessary.
Read safety instructions in
manual before entering
cylinder.
WARNING
Crush hazard.
Can cause serious injury.
Keep hands and fingers
away from moving parts.
12
Cylinder and Processing Hazards
[Document
PELLERIN MILNOR CORPORATION