Safety Alert Messages-Unsafe Conditions; Damage And Malfunction Hazards; Hazards Resulting From Inoperative Safety Devices; Hazards Resulting From Damaged Mechanical Devices - Milnor MWF Serie Manual De Instrucciones

BIUUUS14 (Published) Book specs- Dates: 20051111 / 20051111 / 20051116 Lang: ENG01 Applic: IFN HON
5. Safety Alert Messages—Unsafe Conditions

Damage and Malfunction Hazards

5.1.

Hazards Resulting from Inoperative Safety Devices

5.1.1.
DANGER 8 : Entangle and Sever Hazards—Cylinder door interlock—Operating the
machine with a malfunctioning door interlock can permit opening the door when the cylinder is
turning and/or starting the cycle with the door open, exposing the turning cylinder.
• Do not operate the machine with any evidence of damage or malfunction.
WARNING 9 : Multiple Hazards—Operating the machine with an inoperative safety device
can kill or injure personnel, damage or destroy the machine, damage property, and/or void the
warranty.
• Do not tamper with or disable any safety device or operate the machine with a
malfunctioning safety device. Request authorized service.
WARNING 10 : Electrocution and Electrical Burn Hazards—Electric box doors—
Operating the machine with any electric box door unlocked can expose high voltage conductors
inside the box.
• Do not unlock or open electric box doors.
WARNING 11 : Entangle and Crush Hazards—Guards, covers, and panels—Operating
the machine with any guard, cover, or panel removed exposes moving components.
• Do not remove guards, covers, or panels.

Hazards Resulting from Damaged Mechanical Devices

5.1.2.
WARNING 12 : Multiple Hazards—Operating a damaged machine can kill or injure
personnel, further damage or destroy the machine, damage property, and/or void the warranty.
• Do not operate a damaged or malfunctioning machine. Request authorized service.
WARNING 13 : Explosion Hazards—Cylinder—A damaged cylinder can rip apart during
extraction, puncturing the shell and discharging metal fragments at high speed.
• Do not operate the machine with any evidence of damage or malfunction.
WARNING 14 : Explosion Hazards—Clutch and speed switch (multiple motor
machines)—A damaged clutch or speed switch can permit the low speed motor to engage during
extract. This will over-speed the motor and pulleys and can cause them to rip apart, discharging
metal fragments at high speed.
• Stop the machine immediately if any of these conditions occur: • abnormal whining sound
during extract • skidding sound as extract ends • clutches remain engaged or re-engage
during extract
Safety Alert Messages—Unsafe Conditions
15
PELLERIN MILNOR CORPORATION